Whole-Home Repipe in Shoreline, Washington

The highest-risk pipe materials: galvanized steel (orange/brown discolored water, reduced pressure throughout the house, corrosion visible on exposed sections), polybutylene (grey flexible plastic, installed 1978–1995, known to crack from chloramine exposure in treated municipal water), and lead pipe (homes built before 1930 with grey or dull silver pipes). Additional indicators for any material: recurring pinhole leaks at multiple locations within 12–18 months, persistent low pressure that doesn't improve with fixture cleaning, and brown staining that returns at fixtures after cleaning.

PEX-A (cross-linked polyethylene, Uponor type) is the dominant choice for residential repiping today: flexible (reduces the number of fittings needed), freeze-resistant (expands rather than splitting at 32°F), compatible with push-fit and expansion fittings, and CPVC-compatible. Copper remains the premium choice in very soft or aggressive-water markets where long-term PEX chemical compatibility is a concern, and in high-temperature applications. Both carry 25-year manufacturer warranties when properly installed. PEX-A is typically 20–30% less expensive in total installation cost due to fewer fittings and faster installation.

A single-story 3-bedroom home with accessible walls takes 2–3 days for PEX installation. A two-story home or a home with difficult access (slab-on-grade, finished basement, tile over all plumbing walls) takes 3–5 days. The timeline includes: opening access at each rough-in point, running new distribution lines, reconnecting all fixtures, pressure testing, and patchwork inspection. Drywall patching and painting is a separate scope, typically done by a different contractor after the plumber closes out the permit.

Almost always, yes — significantly. Galvanized pipe corrodes from the inside, and the corrosion layer narrows the pipe bore progressively over 30–50 years. A ¾-inch galvanized supply line can effectively narrow to ¼-inch bore after decades of scaling, cutting pressure and flow dramatically. New PEX-A or copper maintains full interior bore indefinitely. Most homeowners report noticeably improved pressure and faster hot-water delivery within the first week after repipe. It also frequently resolves "low cold pressure when someone showers" problems caused by restricted cross-section in undersized corroded lines.

A plumbing permit is required in all jurisdictions for a whole-home repipe. The city inspector visits for a rough-in inspection (before walls are closed to view pipe routing and connection methods) and a final pressure test. Maintaining the permit documentation is important: it's required for resale disclosure, and some homeowners insurers offer premium reductions after a documented galvanized-to-PEX or lead-to-copper repipe. The plumber schedules all inspections and provides the closed permit record when the job is complete.

Shoreline water is very soft (0.5–2 gpg), so mineral scale is not a significant driver of whole-home repipe issues there. Corrosion-related problems (soft water can be slightly more aggressive toward copper over long periods) and age-related pipe deterioration are more common concerns in Shoreline than hard-water scaling.

Shoreline averages 20 days below freezing per year, which requires pipe burial below the 8 in. frost line for outdoor and foundation-edge supply runs. Freeze-thaw cycling stresses underground pipe joints and can crack fittings at the thermal boundary (where heated space ends and unheated space begins).

Census data (American Community Survey) puts Shoreline's median home age at 48 years. Age alone does not tell you what pipes a particular home has. Older homes may still have galvanized pipe, cast-iron drains or Orangeburg sewer laterals; homes built from the late 1970s to the mid-1990s may have polybutylene supply lines; and many homes of every age have been partly or fully repiped with copper pipe or PEX since. Ask the plumber what pipe materials your home has and whether they change the scope or the price of the job — a pipe material check is a reasonable part of a diagnostic visit.

Total linear footage, material choice (PEX vs. copper vs. CPVC), number of fixture connections, and permit inspection hold points drive cost at the high end. Foundation slab penetrations, finished-ceiling access, and drywall restoration are typically scoped separately. Footage and material are confirmed from a full-property walkthrough before quotes are issued. Ask the plumber for a written estimate covering price, scope, and permit requirements before any work begins.

AlertPlumber does not license, vet or employ plumbers; calls are connected to independent local plumbers in our partner's network. Before work begins, ask the plumber for their Washington license number and look it up on the Washington licensing board's public database — it shows current standing, including any recent disciplinary actions, renewals, or lapses. Bonding, liability-coverage and continuing-education rules vary by state; ask for proof of insurance as well.

AlertPlumber does not charge homeowners. AlertPlumber is paid a referral fee by its routing partner for qualifying calls — it is not an added charge to you. Ask the plumber for a written price before any work begins; if the quote doesn't fit your situation, you can decline at any point.